SeedVR2 Video and Image Upscaler | Complete Workflow Router
Use this SeedVR2 video and image upscaler router to choose online image, online video, ComfyUI, 8GB VRAM, or photo restoration workflows.
Door 1
Do not want to install? Use the browser
Skip ComfyUI when you only need one finished asset, when model downloads fail, when a custom node is missing on a deadline, or when an 8GB card cannot hold a useful batch. Local control is for repeatable graphs; one delivery belongs in the browser.
Door 2
Keep installing locally
Continue the checklist, model folders, and VRAM notes on this page.
First-party before/after SeedVR2 proof
This comparison uses a first-party demo source and output published on this page. It is not a third-party customer asset or a promise about every source type.
- Route still images to image upscaling, ComfyUI, or photo enhancement based on source quality and control needs.
- Route motion clips to video upscaling so temporal consistency, model choice, and duration billing are handled correctly.
- Use ComfyUI when you need local model control, not when you only need one finished online result.
Direct answer
The complete SeedVR2 workflow starts with source routing. Clean still images belong in image upscaling. Motion clips belong in video upscaling. Old portraits need photo enhancement first. Transparent assets need alpha-edge review. ComfyUI is for local repeatability and model control, not for every one-off upload. Routing correctly reduces bounces, local setup loops, and wasted credits.
- Use image tools for stills and video tools for motion.
- Use ComfyUI when the graph must be repeatable or offline.
- Use online fallback when users are blocked by missing nodes, model paths, or VRAM.
Complete routing table
A complete SeedVR2 guide should begin by sorting the input. Clean still image: image upscaler. Compressed video: video upscaler. Damaged portrait: photo enhancer first. Transparent PNG: image upscaler with alpha-edge review. Repeatable local batch: ComfyUI. Low-VRAM local machine: GGUF, tiling, offload, and BlockSwap before final output.
This routing table is important for conversions because many search visitors do not know which product page matches their file. The more clearly the blog routes them, the fewer users bounce after landing on a technical article.
- Image source goes to image tools.
- Video source goes to video tools.
- Old photos go to enhancement first.
- ComfyUI is for local control and repeatability.
How to judge the result
For images, compare the original and output at full size around the important subject. For videos, watch motion and check several timestamps. For faces, prioritize identity over sharpness. For product assets, check logos, labels, and straight edges. For transparent assets, preview on multiple backgrounds.
The best tutorial outcome is not always the largest output. It is the output the customer can confidently publish. When a source is too damaged, the page should explain the limit and offer the safest next workflow instead of pushing users straight into another paid run.
Who this guide is for
Built for search visitors who need a finished upscale, local ComfyUI users choosing between native SeedVR2 and community extensions, and teams deciding whether online delivery is safer than local GPU maintenance.
Test method and evidence scope
- Published
- 2026-07-31
- Updated
- 2026-08-23
- Owned online proof
- WaveSpeed SeedVR2 image endpoint, owned SVG source, 768px input to 2048px WebP output, submitted 2026-07-20.
- Local ComfyUI evidence scope
- Use this page as the capture checklist for RTX 8GB, 12GB, 16GB, and 24GB+ local validation before publishing hardware-specific claims.
- Success standard
- 100 percent crop or timestamp review must preserve identity, text, edges, color, and motion without hiding setup failures.
GPU and parameter table
| VRAM | Model | VAE tiling | BlockSwap | Batch | Output limit | Risk |
|---|---|---|---|---|---|---|
| 8GB | 3B or GGUF Q4_K_M/Q8_0 first | On when encode/decode memory fails; start near 1024 tile and 128 overlap | Use only after a repeatable CUDA OOM or model-fit failure | Image: 1. Video: 5 when motion consistency matters | 720p-1080p tests, then 2K stills; avoid long 4K video first | Slow transfers, seams from too little overlap, repeated OOM on long clips |
| 12GB | 3B FP8/GGUF or conservative 7B test | On for 4K stills or large frames; off for small clean tests | Light swap only when peak memory proves it is needed | Image: 1. Video: 5-9 after a short test | 2K-4K stills, short 1080p video segments | Borderline 7B jobs can pass once and fail on larger aspect ratios |
| 16GB | 3B/7B FP8, then FP16 if the source deserves it | Use for large frames and 4K; keep overlap visible in notes | Usually off for image tests; use for heavier video batches | Image: 1. Video: 9-13 when stable | 4K stills and moderate video clips | Overconfident 4K/8K jumps can amplify source artifacts |
| 24GB+ | 7B FP16 or sharp variant after a 3B baseline | Optional for smaller jobs; useful for high-resolution output | Usually off; keep it as a fallback, not a default | Image: 1. Video: 13-21+ after memory logging | 4K stills, longer 1080p/4K segments, production comparisons | Bigger models can invent sharper artifacts when the source is poor |
Next step: run one file online
Put one source file through the browser workspace and compare the result with the original before you commit further. The credit cost for the whole task is shown before it starts, so the first run is a measured decision rather than a guess.
Troubleshooting errors people actually search
SeedVR2 missing node
The workflow references a node type that this ComfyUI build cannot load. A native template usually means ComfyUI is outdated; a v2.5 community workflow may require its matching custom node.
Update ComfyUI to 0.28.0 or newer and reopen the official SeedVR2 template first. Only install the matching community node when the workflow explicitly depends on it, then restart and resolve the first terminal error.
CUDA out of memory
The graph, model precision, frame batch, or target resolution is larger than the available VRAM for the current run.
Reduce target size or batch first, then enable VAE tiling, CPU offload, GGUF/FP8 models, or BlockSwap in that order.
model not found
The node loaded correctly, but the workflow-selected model filename does not match the local folder scanned by the node.
Place DiT and VAE files in the documented SeedVR2 model folder, keep filenames unchanged, restart ComfyUI, and select the exact model in the loader.
VAE decode crash
Encoding or decoding large frames can fail separately from DiT model inference, especially at 4K or with long clips.
Enable VAE tiling, start with a conservative tile size and overlap, then increase output size only after a smaller pass succeeds.
ComfyUI Manager install failed
The node package may be blocked by Python environment mismatch, dependency conflicts, or a stale Manager cache.
Confirm the base ComfyUI workflow runs, install one node package at a time, restart, and use the browser workspace when the asset must ship before dependency repair.
Workflow decision table
| Scenario | Recommended path | Local setting | Online fallback | Risk |
|---|---|---|---|---|
| Compressed video clip or social export | Online video upscaler | Test 5-9 frame batches and memory logging if self-hosting | /tools/video-upscaler | Single-frame sharpness can hide flicker and identity drift |
| Self-hosted engineering evaluation | Local ComfyUI or FlashVSR test bench | Same source, timestamps, resolution, codec, and warm-up policy | /seedvr2-vs-flashvsr | GPU queue, storage, retries, and monitoring become part of cost |
| Still image or product crop | Image upscaler or Crystal upscaler | Batch 1, crop review, VAE tiling only when needed | /tools/upscaler | Video models are overkill for a single still asset |
Choosing between the browser and a local install
Use the online video upscaler when the source is a motion clip, duration pricing matters, or temporal consistency is more important than owning the node graph.
Sources and update notes
Checked against the linked ByteDance, Hugging Face, Comfy-Org, and ComfyUI sources plus the displayed first-party comparison.
- ByteDance Seed official repository
Upstream source for the Apache-2.0 license, official 3B/7B checkpoints, snapshot_download examples, H100 reference environment, and documented model limitations.
- Comfy-Org ComfyUI repack
ComfyUI-formatted model files and their exact diffusion_models and VAE directories; this is a repack, not the ByteDance model publisher.
- NumZ community custom node
Community-maintained custom node used for v2.5 layout, GGUF, tiling, BlockSwap, and batch behavior; it is not an official ByteDance release.
- Official ComfyUI video upscaling documentation
Current ComfyUI documentation exposes both open-source and hosted SeedVR2 workflows and recommends testing sample clips before full processing.
- Official ComfyUI SeedVR2 workflow template
The maintained template identifies ComfyUI core 0.28.0, the 3B INT8 diffusion model, the shared VAE, exact model folders, and native SeedVR2 support.
- SeedVR2 paper
Used for the one-step video restoration framing and source-quality expectations.
- First-party SeedVR2 image comparison
Before/after image proof generated from a self-authored SVG source, with request metadata published alongside the asset.
Related SeedVR2 workflows and fixes
AI image upscaler — upscale a photo online
Upscale a photo online in the browser and see the credit cost before you run.
SeedVR2 ComfyUI Install Guide: 3B/7B & Missing Nodes
SeedVR2 ComfyUI install: update to 0.28.0, place seedvr2_3b_int8_convrot.safetensors and the VAE in the right folders, then fix OOM and missing nodes.
Can SeedVR2 Run on 8GB VRAM? OOM Fixes That Work
SeedVR2 on 8GB VRAM in ComfyUI is a community experiment, not an official promise. Reduce resolution, try INT8 or GGUF, VAE tiling, then BlockSwap.
SeedVR2 Z-Image 4K Upscale on 8GB VRAM (Guide)
Z-Image 4K upscaling with SeedVR2 on 8GB VRAM: generate with Z-Image first, test a 2K crop before 4K, enable VAE tiling, and upscale only sources with detail.
AI video upscaler — upscale a video online
Open the AI video upscaler for duration pricing, model choice, and temporal cleanup.
Old photo enhancer
Start here for damaged portraits, scanned family photos, blur, grain, or identity-sensitive faces.