SeedVR2
  • Pricing
  • Bulk quote
  • Compare
SeedVR2
Pricing ExplainedHow To Guides

How Much Does It Cost to Upscale a Video to 4K? (2026)

A transparent 4K upscaling cost breakdown for 10-second, 30-second, and 1-minute clips, including SeedVR2 credit rates, the hidden cost of failed jobs, and when 2K is the smarter buy.

SeedVR2 Team·October 18, 2026

Free Trial & Grants

20 signup + 10 daily credits · Free first 2K image or 5s 720p clip

Video Rate (Standard)

From 45 credits (5s 1080p) · 9 / 17 / 33 cr/s

Image Rate (SeedVR2)

10 credits at 2K · 20 at 4K · Non-expiring packs

How Much Does It Cost to Upscale a Video to 4K? (2026)

Skip the GPU setup — run SeedVR2 in the cloud

No ComfyUI, no 8 GB VRAM, no installation. Upload and get a 2K result in seconds.

Try the online upscaler
Live Tool Inside Article0 upload · Runs locally in browser · Exact live checkout rates

Test your video or photo right here — no page jump needed

Drop a local clip or image to check resolution, edge sharpness, and exact SeedVR2 credits in your browser, calculate pack costs, or drag the real 2K before/after frame slider.

Inspect one local file

This check never leaves your browser. Use it to confirm the source is large enough to enlarge, then jump to the calculator or the live upscaler.

Estimate the full batchOpen the matching upscaler

Run Your File Now

Inspect your source in the workbench above or open the cloud renderer directly.

Test a File on This PageOpen Video UpscalerOpen Image Upscaler

The honest answer to "how much does 4K upscaling cost?" is: it depends on the length of the clip, the model, the resolution you start from, and whether you pay per job or own the hardware. The useful answer is a table you can apply to your own file. This guide uses the published SeedVR2 credit rates and shows the math for common clip lengths.

The first thing to fix is the unit. A 4K upscale is not priced per file. It is priced per second of source footage, with a minimum charge. That is why a 5-second clip and a 60-second clip can differ by more than ten times even though both become one 4K file.

The published rate card

On the standard SeedVR2 video model, the published rates are:

TargetCredits per second5-second minimum
720p945
1080p945
2K1785
4K33165

The 4K rate is 33 credits per second. A clip shorter than five seconds still bills as five seconds, so the smallest 4K job is 165 credits. A 10-second clip is 330 credits. A 30-second clip is 990. A 60-second clip is 1,980.

Those are credits, not dollars. The dollar conversion depends on the pack you buy, and the public ladder changed in November 2026, so this page deliberately does not restate it: the pricing page and the checkout quote are the only price sources. What does not change is the ratio between targets — a 4K job costs 33/17 of a 2K job at the same length, and 33/9 of a 1080p job.

Why the 4K number is not the whole cost

The credit rate is the visible cost. There are three less visible ones.

Failed jobs. A failed generation should return its credits, but you still lose the time and the review cycle. A provider outage, a content-policy rejection, or an infrastructure error can stop a job after you have already uploaded and waited. The refund policy matters as much as the rate card, because a cheap job that fails twice is not cheap.

The wrong resolution. If the source is a compressed 480p phone clip with no real detail, a 4K target may produce a larger file without adding usable information. You pay the 4K rate for pixels the model had to invent. A 1080p or 2K run is often the better first test. If the result holds up at 2K, then decide whether 4K adds anything.

Your review time. A 60-second 4K job is not finished when the file arrives. You still need to watch it, compare faces, check edges, and decide whether the output is deliverable. That time is real, especially for client work.

2K versus 4K: when the cheaper job wins

The 2K rate is 17 credits per second, roughly half the 4K rate. For a 30-second clip, that is 510 credits instead of 990. The question is whether the difference is visible in your delivery.

Use 2K first when:

  • The source is soft, compressed, or below 720p.
  • The final delivery is a phone screen, a social feed, or a web player.
  • You are testing whether the model preserves identity before spending on 4K.
  • The clip has fast motion and compression artifacts that 4K will enlarge rather than fix.

Use 4K when the source has real detail, the delivery asks for a 4K master, and the 2K test already looks clean. The worst outcome is paying the 4K rate for a clip that needed cleaning, not more pixels.

What local GPU upscaling really costs

A local run has no credit meter, but it is not free. You pay for the GPU, the machine, the electricity, and the time. The electricity is usually the smallest part. A 300W GPU running for ten minutes uses about 0.05 kWh; at $0.15 per kWh that is less than a cent. The hardware and the setup time dominate.

That is why the comparison is not "hosted credits versus zero". If you already own a capable GPU and run the same workflow every day, the marginal cost of another local job is small. If you are buying a GPU for one family video, the hosted job is usually cheaper. The break-even point depends on how many jobs you run and how much you value the setup time.

How to estimate your own clip

  1. Check the source duration in seconds. Round up to the next whole second.
  2. Apply the five-second minimum.
  3. Multiply by the per-second rate for your target. Use 33 for 4K and 17 for 2K on the standard model.
  4. Compare the credit total with the pack price. Do not compare with the largest pack if you only need one job.
  5. Run a 2K test first if the source is soft or the face matters.

The calculator below does the arithmetic for you, and the live video upscaler quotes the exact credits after it reads the real file duration.

Run the numbers on your own clip

Pick a target resolution and a clip length. The output is the same credit total the upscaler shows before you submit, plus the packs that cover it.

Estimate credits before you buy

Choose the workload that looks like your next batch. The estimate uses the same credit rules as the tools, then points you back to the smallest credit pack that can cover it.

Estimated workload

45 credits

1 video(s) · 45 credits each

Estimated time
40s–1m 3s
Estimated output size
5.0 MB

Estimate, not a measurement: Standard is configured at about 10s of processing per second of footage. Queue load and source complexity move the real time inside this band.

Per hour of source footage: 32,400 credits. A two-hour tape is 12 submissions of at most 10 minutes each, about 64,800 credits in total.

A confirmed system or provider failure triggers an automatic credit-return attempt.

Time and size are planning estimates. The live preflight is the source of truth before you spend credits.

Recommended: Starter Pack

$19.00

800 credits delivered. Select it above and continue to checkout when ready.

Use recommended packBack to plans

The hidden cost of a bad output

A cheap upscale that changes a face is more expensive than a slightly higher-priced job that preserves it. For family footage, the face is the product. For product footage, the logo and texture are the product. For client work, a rejected deliverable costs another job, another review, and sometimes a refund.

This is why the first run should be a test, not a batch. Pick one clip, run it at the resolution you can afford, and inspect the details that matter. If the result is clean, scale the workflow. If it is not, change the source, the target, or the model before you spend on a longer clip.

FAQ

How much is a 10-second 4K upscale? 330 credits on the standard model. Convert that at whatever per-credit rate your pack gives you; the pricing page shows the current ladder.

How much is a 30-second 4K upscale? 990 credits. The dollar figure is your pack price divided by its credit total, times 990; the pricing page has the live numbers.

Is 4K always better than 2K? No. If the source has no real detail, 4K can enlarge artifacts. Test 2K first when the source is soft or compressed.

Do failed jobs cost credits? The system attempts to return credits for provider failures, policy rejections, and infrastructure errors. Check the current refund policy for the exact window and limits.

Can I upscale a clip longer than one minute? The video tool supports longer clips up to the published maximum, and the cost scales per second. A 60-second 4K job is 1,980 credits on the standard model.

Price your own clip: open the video upscaler, upload the file, and read the credit quote before you submit. Start at 2K if the source is soft; move to 4K only when the test output earns it.

Keep reading

  • Gemini Omni Clip to 4K: Credits Before a Topaz SubPrice a Gemini Omni clip on seedvr2 before a Topaz Web Video month. Entry pack $14.99/600cr — Standard from 45cr; SeedVR2/Pro lane ~165cr for 5s·720p.Read guide →
  • SeedVR2 Standard ~45 Credits vs Pro Lane ~165: Which Job?When a Standard ~45-credit upscale is enough versus the Pro lane near 165 credits. Same clip, different cost — pick the lane before you burn credits.Read guide →
  • SeedVR2 Credits Explained: Image and Video CostsWhat SeedVR2 credits buy: 2K, 4K, and 8K image prices, per-second video rates by model and resolution, the 5-second minimum, free trials, and dollar conversion.Read guide →

Open SeedVR2 workflows

Pick the dedicated lane that matches the job instead of forcing every task through the same generic generator page.

AI Video Upscaler

Clean up blurry clips and move straight into 1080p or 4K delivery

Try Now

Image Upscaler

Enlarge portraits, product shots, and still frames with 2x or 4x detail

Try Now

Video to Video

Restyle finished footage without rebuilding the whole clip

Try Now

Newsletter

Join the community

Subscribe to our newsletter for the latest news and updates

Published on October 18, 2026 · by SeedVR2 Team

SeedVR2

SeedVR2 is an independent AI upscaling workspace for image and video upscaling, clear job tracking, and delivery workflows.

Launched on FazierLaunched on FazierFeatured on ToolPilot.ai
Company
  • About
  • Blog
  • Tutorial
  • Support
Legal
  • Terms of Service
  • Privacy Policy
  • Refund Policy
  • Acceptable Use Policy
SeedVR2 resources
  • Bulk video restoration quote (per project)
  • SeedVR2 model download (3B/7B)
  • SeedVR2 ComfyUI workflow
  • SeedVR2 Hugging Face models (3B/7B)
  • SeedVR2 GitHub repositories
  • SeedVR2 upscaler download (no app)
  • AI image upscaler online
  • AI video upscaler online
  • Best AI video upscaler compared
  • Video restoration for studios
  • AI video upscaling cost calculator
  • Professional video delivery
  • Halloween AI costume and video tools
  • Flux 2 upscaler (draft to 2K)
  • Unblur text in an image
  • Remove text from video

Get product updates

We'll email you once when a new feature or model launches. No spam.

SeedVR2 is an independent service that provides access to third-party AI models and workflows. We are not affiliated with, endorsed by, or sponsored by the model providers.

© 2026 SeedVR2 All Rights Reserved.